Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson's® WaterSeal® Waterproofing Wood Sealer – Clear.

How long before you can walk on Thompson's water Seal?

Now that you've applied Thompson's Water Seal following the instructions above, to your entire surface, you can walk away and let it dry for 24 hours. That's all the time you need to let Thompson's Water Seal work to protect your outdoor surfaces from water damage.

What happens if it rains after applying Thompsons water Seal?

What happens if it rains after applying Thompson's water seal? A light shower will not significantly affect a deck with Thompson's waterseal, but a heavy downpour will likely cause the product to dry cloudy on the surface. In any case, the sealant will still work despite the rain.

How long does Thompson WaterSeal need to dry before rain?

The forecast should indicate no rain for at least 24 hours after application. The deck surface should be allowed to dry for at least 48 hours before application.

Can I use 2 coats of Thompson's water Seal?

One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water.

Thompson’s WaterSeal Review, Does It Work?!

How many coats of Thompson Water Seal should I put on?

Apply 2 coats using brush,roller or sprayer. note: Use at full strength.do not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.

How long does Thompson seal last?

How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.

Is Thompson water seal worth it?

Is Thompson's WaterSeal Any Good? Our experience with Thompson's WaterSeal Waterproofer Plus Clear Wood Protector was disappointing overall, and we would not recommend this product. Its inability to prevent UV graying is too harmful to your deck's wood.

Can Thompson water seal go over stain?

Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. But surface preparation is key. If the stain has completely dried and cured it's fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.

Does Thompson water seal peel?

Thompson's WaterSeal has clearly not been a consumer favorite with deck stains or sealers. Mainly as it does not offer any UV protection and it grays in a few months. The Transparent and Semi-Transparent versions are prone to premature peeling and wearing after about 1 year.

What happens if it rains before deck stain dries?

If the rain comes before your deck is completely dry, the water will enter the pores on the wood surface and seep inside, pushing out the deck stain. As a result, the deck surface may appear splotchy rather than smooth and even.

Does Thompson Water Seal dry?

Q: Will Thompson's® WaterSeal® Clear Multi-Surface Waterproofer impart color to my deck, concrete, or brick surface? No. Thompson's® WaterSeal® Clear Multi-Surface Waterproofer applies white but dries clear and allows your wood to gray naturally over time.

What's better than Thompson's water Seal?

According to them, these are the nine most effective wood sealers:

  • Thompson's Water Seal. ...
  • Rainguard Premium Wood Sealer. ...
  • DEFY Crystal Clear Sealer. ...
  • Anchorseal 2. ...
  • Roxil Wood Protection Cream. ...
  • Eco-Advance Exterior Wood Waterproofer. ...
  • Ready Seal Stain and Sealer for Wood. ...
  • Pure Tung Oil Natural Wood Sealer.

What happens if it rains after you seal your deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

Is Thompson Water Seal good for pressure treated wood?

Some, like Thompson's® WaterSeal® Waterproofing Wood Protector, recommend waiting 30 days before application on new pressure treated lumber. Other products, like Thompson's® WaterSeal® Waterproofing Stain, can be applied immediately to new pressure treated lumber.

Is it better to stain or seal a deck?

Deck sealing will protect the wood from splitting, cracking, moisture, mildew, and rot while maintaining the color and grain of the wood. A stain will protect the wood and provides a more uniform tint or color to the wood to complement surrounding structures.

Does sealer darken wood?

It is worth noting that a sealer will still darken a wooden surface very slightly, but it won't make much of a difference. Definitely, if you want to protect the wood from rotting and moisture rather than give it a color then getting the best wood sealer would be a good decision.

What temperature do you apply Thompson's Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application. Perform the splash test. Sprinkle water on various sections of surface to be sealed.

Can you paint over Thompson water seal on wood?

Paint can be applied to water sealers, but the drying time of the sealer itself is the most important part of this task. For best results, prime the water-sealed wood first. Use either a latex-based or an oil-based primer as your first coat of paint before applying the finishing coat.

Is Thompson's water Seal oil based or water based?

Thompson's® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water. Each product has its own "feel" during application; however, each product provides protection from water damage and has a coating that resists mildew and UV damage.

How do I know if my deck is dry enough to stain?

Another way of checking if your wood is ready for stain is to pour a little water on the wood. If the water beads up, the lumber still too wet to be stained or painted. If the water is absorbed into the wood easily, it's ready to be sealed or stained.

How many days after a rain Can I stain my deck?

First, ensure the deck is completely dry. Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it's time to make your deck amazing. When applying stain, a pad, brush, roller, or rag can be used to apply the stain.

Will a sticky deck eventually dry?

In contrast, when stain is left to sit on the wood, the solvents that make the stain a liquid will eventually evaporate. However, the pigments remain behind, creating a sticky mess on the top of the wood. What is this? That sticky pigment mess will never dry, no matter how long you wait.

Can you apply Thompson's water Seal with a pump up sprayer?

Can you spray thompson's water seal? Yes, you can apply your Thompson's water seal using a standard pump garden sprayer and achieve the desired results.